Hunting Wild Boar with the Atlatl and Dart

Gary's Boar

We got started early in the morning. We went out to the land we planned to hunt which is a parcel of several thousand acres along the banks of the Oklawaha River in the neighborhood of Ocala, Florida. We had our rifles and rangefinders in hand and ready to go. I was excited to try out the new long range rangefinder I just bought, read more about long-range rangefinders. The terrain consists of recently cut pine forest, cane break, and virgin cypress swamp, in roughly equal measures, depending on its elevation above the Oklawaha. The property is contiguous with tens of thousands of acres of similar land along the Oklawaha, offering incredibly good habitat for wild boar.

There are also plenty of deer and other wild life in the area including black bear, which we were able to see two years ago in this same location. We have seen osceola turkeys, alligators, squirrels, and monkeys in this location. It was easy to imagine oneself in this setting to be back in the days when atlatl hunting was an every day event.

Warm spring winds blew gently through the palmedows and cane. In the distance I could see a vulture in the tree tops drying its dew soaked wings, outstretched to catch the morning sun and breeze. I hunted from a ground blind that I had hastily constructed out of forest debris that morning in a relatively sparse part of the cane break.

I heard the crackling of wild boar approaching though the dry thatch of dead palmedow leaves. I had been hearing them for a while. But they were now on the other side of the boundary beyond where we were allowed to hunt. My hope was that they would eventually come my way.

Those gentile winds were, however, not blowing in the right direction.

The swine started to put up a squall. I thought they must be fighting over something. I decided to go over and investigate.” The figured the worst thing that could happen is that they would run away.

The squealing became more intense as I got closer. I don’t think they ever noticed me as I approached . The wild pigs were now about fifty yards behind my ground blind in a cane break thicker than the weave of a picnic basket. Atlatls don’t work that well in brush that thick, but you never know, you might get a shot in anyway. My heart pounded as I got closer.

I bent to look under the palmedows and saw the first pig only twelve yards away. I was looking at him looking at me. The jig was up. That pig and the rest of the wild boar herd with it melted into the underbrush. The first sighting of wild boar was getting me excited about the hunt.

We hunted for a few days without much action until one evening on the way out of the woods we encountered a herd of small wild boar crossing a logging road. Normally I don’t think I would have shot at such a small animal but predatory instinct got the best of me. I took a shot at fifty yards and connected— with a little fifty pound pig. I had to shoot the dart at a high angle to get it there. The fact that it hit was either incredible luck or a case of predatory instinct taking over my mind and body. In any case the little boar turned out to be the finest meat we had eaten in a while.

Our next encounter with a boar was the next morning. We had made extensive plans the previous evening, which fell apart as soon as we reached the hunt site. The elusive wild boars were slinking into a large clear cut just as we walked up to it. We put our plans on the back burner and went to plan omega three.

I started out by taking a shot at about thirty five yards but missed. I pursued the boars into the field, knowing Big Wooley and Leggs would get into action and form up a triangle around them. We had talked it over many times in the past about what we would do in a situation like this, so I knew I could count on them. As we closed the triangle in we knew that our quarry would have to go by at least one of us to escape. Leggs signaled me that they were coming my way so I crouched low behind some tall saw grass.

They came out in two groups of three or four each. I stayed low until the first group went by. I had my dart knocked and laying against the back of my left hand which now held five darts. Those five darts were across my knees in the proper position for a quick reload. I stood up and chose the last of the first group of boars as my target.

I shot, leading the running boar just enough. I hit it right behind the left shoulder. The dart drove the three inch flint point deeply into the vitals of the boar. The half inch ash shaft bent but did not break as the boar beat its final retreat toward the row of pines and palmedows.

We even butcher the hogs we kill like cave men. We use stone blades knapped from flint blade cores that we carry in our pockets or leather pouches. At the hog hunt at Cold Brook three years ago the guides were amazed at the efficiency of our stone tools, but they are actually sharper than typical metal knives.

A chill went up my back as I began to hear movement behind me in the pine thicket where I chose to conceal myself. In front of me was a sandy red dirt South Georgia road riddled with gullies carved in it by torrential downpours over the last few years. I knew from experience that the noises I heard were from several wild boar and that they would be crossing the road in front of me pretty soon. Could I move out there where I could take a better shot with my atlatl, without the hogs noticing me? I checked the wind and realized that those hogs already knew I was there. The wind was blowing directly from me to them.

They must have been lying in the thicket since I got there two hours before, from the sound of it. Now they were just shuffling off at a quick pace to avoid me. Nevertheless, I carefully slipped out of my ground blind and brought up my dart, turning just in time to see the last big hog disappear from view on the other side of the road. I was a second too late to shoot. Oh well, at least I got to see one.

A while later Mark came up the road with a somewhat frustrated look on his face. His account of the evenings proceedings was much the same as mine. He told me that he thought it might be just about impossible to ambush a boar in these thick southern yellow pine woods. I agreed with him as we set off for his van. Next time we need to get a little altitude in order to get a clean shot especially if we are going to use atlatls which have a range limited to about 20 yards in the open, with any accuracy. We also need to place ourselves between the hogs bedding area and their food recourses, yet in an area that is somewhat clear.

A clear area in these parts is unusual. Unless someone has made a clearing such as a greenfield, you may not find such a thing in the South Georgia forest. You need to take advantage of open spots such as dirt roads, streams or those rare places under the canopy of hardwood trees. I think I would like to try a tree stand in a hardwood tree next time I go.

Atlatl Hunting and Fishing

Many people have expressed an interest in getting more information about atlatl hunting and fishing. We have come a long way since those first lame attempts at hunting with atlatls and darts ten years ago, but now after making and correcting many mistakes we have developed good workable systems for both hunting and fishing. We have also looked for and found many places where it is legal to hunt or fish with the atlatl and dart. Thanks to the many people who have assisted and accompanied me on my adventures. Bob Berg

Check out a new website on Atlatl Hunting and Fishing.

Visitors From Germany

Welcome to Thunderbird Atlatl’s website. This week we had visitors from Germany- the Weigel Family, who are all good atlatlists.

Next week we plan to be at Land Between the Lakes in western Kentucky for the second annual atlatl fishing derby. All are welcome to join us. Please email me for further information if you plan to go. Bob Berg

The following are some excerpts from the Community Zero website.
Thunderbirdatlatl
Apr-24-2003 10:30 AM
We are glad to have the Family Weigel as guests here at out home in Candor. As many of you already know, Paul is an exchange student who is staying with us for the school year. His parents Uli, Jutta and sister Lene have come to visit. What is special is that we came in contact through this web site. We are having a good time getting to know Paul’s family. We went to the atlatl contest on Tuesday evening at Brandon Anderson’s house and enjoyed the comaradie of the Tioga Atlatl Association. The Waa is truly a world organization. Bob Berg

Thunderbirdatlatl
Apr-23-2003 6:57 PM
hey ich habe eben den anschlag von meinem vater & gast vater gelesen und wollte natuerlich auch eben sagen das es mir gut gefaellt meinen familie wieder zu sehen und zu zeigen wie und wo ich das letzte jahr gelebt habe. ausserdem ist dies natuerlich eine gute gelegenheit um ein paar deutsch- americanische atlatl kontakte zu knuepfen. paul

Thunderbirdatlatl
Apr-23-2003 6:49 PM
Apres la instruction de Bob en aleman je peux constate, que nos sommes tres allegres en la maison de la famille Berg, aussi heureux de revoir notre fils Paul apres 9 mois, domage que n’y a pas plus que 3 jours de rester, mais en effet un exellent possibilite de constater les meilleurs relations europeens-americains en sujet d’ AtlAtl.- y surtout en relation “interpersonel”! Salut y hello a tout le monde! Bob and Uli

Thunderbirdatlatl
Apr-23-2003 6:34 PM
Die Familie Weigel ist jezt bei uns in Candor. Wir habens uns mit Communitz zero kennengelernt. Viele von Euch haben shon die Gelegenheit gehabt, Paul kennenzulernen. Er war bei uns in Flintridge, Letchworth, Paines Prarie und mehreren anderen Orten. Gestern haben wir einen kleinen Atlatlkontest bei Brandon Anderson in Waverly gehabt. Wir haben viel Spaß gehabt neue Freunde kennengelernt. Bob

Spring 2003! Another Atlatl Season Under Way!

Spring Fever is hitting the atlatl world! Atlatl contests started in January but they become more and more plentiful as we move into the warmer weather. Check out the World Atlatl Association website for a complete listing of upcoming contests.

Thunderbird Atlatl had some earlier adventures in Feburary and the beginning of March in Florida, Georgia and Alabama. We will be attending shows in Georgia, New York, Pennsylvania and Michigan over the next few months.

Atlatl Dart Making Instructions

fletchpict
Finished Dart. This dart is made from a 9/16×7′ Thunderbird Atlatl dart shaft, 3 Gateway full length fletches, artificial sinew and Elmers carpenter glue

A properly made dart is the most important part of a spear throwing set. These instructions will take you through the process step by step. Wooden shafts available from Thunderbird are made from straight grained hardwood. However, even the straightest grained wood may need a little straightening. This is accomplished by simply bending the shaft in the opposite direction of the bend. This is most easily accomplished when the dart is relatively new. After several months the shaft will season in and become harder to straighten without heating. If this is the case heat it over a heat source such as a kitchen stove and carefully apply pressure in the opposite direction of the bend (be careful not to burn the wood or your hand). I recommend the use of thick leather gloves for this procedure. Apply light constant pressure, checking often to see if the shaft is straight.

The heat will allow the fibers on the inside of the curve to stretch and the fibers on the opposite side to compress. Cooling will allow the wood to “set” and remain straight. Be patient and work back and forth over the full length of the shaft until all the curves and bends are straightened out. Be careful to not char or burn the wood. The tip of the dart is already tapered for the field points enclosed in your kit. The top of the dart is also finished for using it with your atlatl. Finish the shaft with a waterproof wax or oil. Avoid finish at the tip and where the feathers will be glued or plan to scrape it away before glue is applied.

The best adhesive to apply the field tip with is “amber” hot glue, used in a commonly available hot glue gun. Put the hot glue on the wood, turning the dart shaft to apply it evenly. Heat the field tip at the open end , enough to melt the glue when it is applied to the tapered end of the dart, turning it almost as if you were tightening a screw. The glue will set when it is cool. Wait until the glue is totally cool to the touch before casting it, or you will loose the tip. Do not put the glue into the hollow part of the field tip first as the glue will harden before you can attach it to the wood.

Trim three feathers to the desired length, leaving a ½ ” tab at each end where the vanes are trimmed off. Tie the feathers to the dart with a 4 foot length of artificial sinew or thin thread. The strand of artificial sinew will split into four parts that are perfect for fletching. Be careful to separate it along the natural seams or it will “fuzz up”. Start by determining the location of the front end of the fletching. Allow 1 ½’ from the back end of the dart to the back end of the fletching. Use a dab of glue to embed the thread at the front end of the fletching. Roll just enough of the thread onto the dart until it “catches”. Then place the first feather with the front tab centered over the thread. Wrap it twice and add the next feather the same way, then finish with the third. The three feathers should be evenly spaced around the round dart. After covering the tabs with thread, start wrapping the thread through the vane in a helical fashion. The best results are achieved by wrapping at the same angle as the vane leans back from the quill. Finish by covering the back tab with thread. Whip the end with a loop of thread, pull it through and snip off the excess. Smear a daub of glue on the thread at each end. – Bob Berg

howtothrow

Bob Berg With Several Finished Darts. Here is the result of several hours of dart making by Bob Berg. Two of these shafts were painted black.

The world's foremost atlatl and dart outfitter