Our instruction sheet for Ferr-L-Tite hot-melt glue, written in 2020. If a point comes off one of our darts, this is how to fix it.
Ferr-L-Tite is a hot-melt stick glue made for holding arrow and dart points. A point glued on this way can be heated and taken off again later.
You’ll need
- A stick of Ferr-L-Tite hot-melt glue
- A heat source: an open flame, gas stove burner, heat gun or propane torch
- Pliers
- Gloves
- A cup of cold water
Steps
- Make sure the gluing surfaces are free of paint, lacquer or oil.
- Put on gloves. Hold the end of the glue stick with pliers and heat it.
- Dab a small amount of glue on the tapered end of the dart.
- Hold the field point with pliers and heat it.
- Push the hot point onto the end of the dart with a twisting, pushing motion.
- Dip the hot point into cold water to help the glue bond.
- Stand the dart up, point up, until the point cools.
