Accessories
Points, fletching supplies, glue and repair kits for keeping your darts flying, plus atlatl weights and a few extras.
Points and dart repair




Field points, copper and stainless steel points, and broadheads.
Points for use on darts.
Field (Metal) Points
Copper Points
Ace Broadheads
Bone Points
Stone (Flint) Points
Stone points made by Bob Berg or purchased from other well qualified flintknappers are available. They are sold per inch. They are guaranteed to be pointy at the end, sharp on the edges and thin enough to haft. Bob Berg selects these points for their usefulness for the purpose of hunting. Of course, they make great wall hangers too. For more information, contact our shop by phone or email.




Pine-based glue for hafting stone and metal points.
This pine resin based adhesive is heat activated for attaching dissimilar materials that have different coefficients of expansion like metal or stone blades to wood, bone or ivory handles. This formula was developed originally using traditional and natural materials for attaching stone points to wooden arrow or dart shafts. The bond is able to withstand shear forces; tough yet flexible it adheres well to many different materials, as long as all parts are dry. It forms a durable composite when used in conjunction with fibers as long as the fibers are thoroughly saturated and all air is pressed out of the joint. A broken joint can be reheated and attached again and again as often as necessary.
We have introduced this glue this year at various shows we traveled to and have had many positive reports. One customer suggested our new hafting resin has some “mojo”. We don’t know about that but we know it has been tried and tested by ourselves and customers and it seems to be doing a good job! We are now offering 10 pieces of hafting resin in a package. Save a few dollars on a bulk order!
Ordering Information: Please note each package contains two blocks of the resin-show in Gallery Photos. The tools and bowl shown are only for illustrative purposes. S/h should be the small package order selection if you are ordering only the hafting resin.
Fletching

The Thunderbird fletching clamp is symphony of simplicity, utility and durability, only requiring the custom application of duct tape to make it the most useful item in your atlatl tool kit. It is designed to attach full length fletching to your darts by hand. Some diabollically clever people have developed their own holding mechanisms from books, clothespins, modeling clay, duct tape and other locally available hardware to enhance the effectivness of this famous tool.

Fletch-Tite Platinum has been the industry standard for over 70 years, and is still the archery industry’s most flexible and durable adhesive! Its flexible bond absorbs shock and won’t crack or become brittle after repeated target impacts. Fletch-Tite Platinum is a solvent-based glue designed for vanes, feathers, and swedged nocks, and it’s perfect for securing the tip & tail of vanes & feathers. It works on all shaft types but is especially recommended for carbon and wood. And clean-up is so easy – excess glue can simply be scraped off with a fingernail. The recommended clamp time is 5 minutes, and cure time is 24 hours (48 hours if environment is humid). For best results, fletch in an environment with low humidity. Do NOT store Fletch-Tite Platinum in the refrigerator. To prevent it from drying out prematurely, ensure cap & tip are tightly sealed. Available in 3/4 oz tubes, pints, quarts, and gallons. Two years expiration on unopened tubes.
Extras









Balance and steady your atlatl. Some are made to order.
Atlatl weights add balance and stability to an atlatl system. They improve accuracy for many atlatlists and make it easier to hold the atlatl steady while aiming at the target. One reason it helps to steady the atlatl is that it balances the weight of the dart. It also adds inertia to the system which tends to minimize shaking and wiggling caused by the atlatlist’s body functions such as heartbeat and respiration etc.
Depending on the placement of the weight on the shaft of the atlatl, there is also more or less of a “pendulum effect” which helps to stabilize the swinging atlatl during the shot. Placing the weight closer to the hook end of the atlatl produces more of the effect at the expense of some of the speed or energy of the shot. Placing the weight closer to the handle is a good compromise between not having a weight and having it out at the distal end.
Besides that, atlatl weights look really great on your atlatl! (not to mention the Ooga Booga effect, which if you belong to the Secret Ear-o-Corn you understand without further explanation.)


Bob’s DVD introduction to atlatls.
Atlatl Fever is a DVD introduction to atlatls, hosted by Thunderbird Atlatl’s Bob Berg.
Bob goes over the basics of how to use an atlatl, its history, the different atlatl types available, and more. Have your own personal atlatl coach right in your living room!
DVD Copyright (C) 2011, produced by Owego House Productions.










