Bob wrote this in 2008.
I use a mixture of 75 percent linseed oil, 15 percent tung oil and 10 percent citrus oil, with a dash of Japan drier. Keep the lid on tight and don’t leave the bottle open for long, because it will jell. I make a quart or two at a time to keep that from happening.
It smells good, isn’t very toxic, and it polymerizes nicely. What I like about it is that it is very forgiving: you can clean the dart and reapply it any time. It doesn’t lock the dart into a fixed shape, so you can straighten it easily, unlike urethane finishes and hard paint, which hold the shape.
This finish needs to be applied several times. The citrus oil helps the linseed oil penetrate deep into the wood, and the tung oil helps it form a good polymerized finish. For darts used in changing humidity, oil finishes are the best. Lacquer, shellac and urethane varnishes sit on the surface and affect the spine of the dart a little. They work OK, but they only look good when they are new.
I do use shellac as a binder on my fletching. It works well on waxed nylon or artificial sinew to keep the thread from unraveling.
A note on carnauba wax
Carnauba wax is a natural wax from the leaves of the carnauba palm. Mixed at 5 to 20 percent with beeswax, pine pitch, birch tar, charcoal powder, ochre or shredded plant material, it makes traditional hafting glues and fillers. Carnauba tempers pitch glues, making them less likely to crack or deform. It melts at 180 to 187 degrees Fahrenheit.
