Bob Berg’s bamboo atlatl darts: 20 years of trial and error

Bob wrote this in 2011. For the step-by-step method, see the cane dart video tutorials in the video library.

My atlatl darts have come a long way since I first started making them about 20 years ago.

In 1996 I went to Florida on an atlatl hunting trip and picked up about a hundred pieces of bamboo that looked like they would make good darts. I brought it home and got to work. The cane was dead green and needed to be straightened to make a reasonable-looking dart. I used the kitchen gas stove to heat the cane, and after about 10 tries I got the hang of straightening them. Many of the shafts exploded when I heated them, leaving a fatal flaw: a crack down the length of the shaft. At the time I solved the problem by drilling small holes through the nodes to let the steam out. I made a few dozen darts but was not impressed with the results. Now I have solved the problem by curing the cane and stripping out the little bud that grows at each node.

Wooden darts first

At that time wooden darts were my focus. I started out making darts of hemlock, spruce and fir, which for the most part were good darts, if somewhat fragile. I made them eight-sided because I lacked an easy way of making them round.

I was also working out a way of making darts using only the tools the Indians would have had. It turned out that ash logs were fairly easy to split into usable staves. I made several dozen darts from split staves and found them to be just fine; they were naturally tapered by the way they split. I shaved the corners off with flint blades after learning how to work flint blade cores. The weight and flex of ash seemed just right for darts. I tried many other woods but settled on ash as the best choice. I gave up on cane for a time to focus on wooden darts.

Back to bamboo

I have learned a lot more about bamboo since then, mostly in the last three years. I now harvest several thousand pieces of cane each year. I season, treat and handle it using methods I learned from my good friend Jaap Koppedrayer, who trained with Kanjuro Shibata, a 20th-generation bowmaker to the Emperor of Japan. Jaap goes to Japan now and then to work with Shibata Sensei and his son in their shop and afield harvesting bamboo, and he has started his own bamboo plantation in Georgia, not far from the Okefenokee Swamp.

I now use Japanese arrow bamboo (Pseudosasa japonica). The Japanese have made arrows from this bamboo for centuries. Some of the methods I use were shared with me in confidence, so I won’t describe them here; they happen mostly between harvesting the cane and straightening it. The end product is a very stable dart shaft with superior flight characteristics.

Points and hafting

The second part of my study of bamboo darts was finding out what ancient people in America used for dart points, and replicating them. I use flint, bone, antler and copper. Copper has become my favorite, and my customers’ favorite too.

I developed a way to haft copper points directly to the bamboo shaft without a foreshaft, which I believe is a poor design. Hard bamboo fills the hollow of the shaft back to the first or second node. This makes the end of the shaft strong and durable without changing how the shaft flexes. I use a similar method at the back of the dart to strengthen it, and I have worked out a better way of building up the back of the shaft to make the right size and shape of nock dimple. I place the fletching about 1½ inches forward of the back end of the dart. Ultra-high-speed video of darts fletched this way shows the most consistent flight.

Many in the atlatl community have gone to cane darts, which for distances of 15 yards and longer seem to perform better than wooden darts, as long as you are shooting at paper or hay, where penetration is unimportant.

More tutorials →

Leave a Reply

Your email address will not be published. Required fields are marked *

Older post
Newer post